NEW DURABRIC panels come in two basic shapes as shown
below. However, if there is nothing here that suites your
needs have a look at the "DESIGN YOUR OWN TEMPLATE"
option on the NEWS
page.
STANDARD RECTANGLE
BRICK SIZE: 214mm X 75mm
MORTAR WIDTH: 11MM
Click PICTURE
to enlarge
TUMBLED
BRICK SIZE (APPROX):
214mm X 75mm
MORTAR WIDTH (SLIGHTLY VARYING DUE TO EDGES BEING ROUNDED):
11MM
Click PICTURE to enlarge
STANDARD RED &
PAINTABLES
For those customers who simply require 1, 2 or even
5 sheets we have two options available.
1. We
make a “Standard Red” brick panel with
Grey mortar line. (See DTB INTERNATIONAL PUMPING
display in the
"Gallery" under Trade Displays.)
2.
We also make “Paintables.” These are sheets with no brick colour and no mortar colour. These
sheets costs less than the others as less work is required to make
them. However, it should be noted that they do need to be painted
with Acrylic paint only as the thinners in enamel paint can react
with the copolymer glue in the bricks. Also, as we haven’t painted
them, the cement sheeting is not yet sealed or waterproofed.
Painting the sheet does this.
Below is an example of a "paintable" which has been
painted by the customer.
(Click For A Larger Image)
As is the case with colour matching jobs, filler is provided for
you to cover nail / screw holes and to cover any joins you create.
(See FILLING in the
installation section)
NOTE:“Standard Red” and
“Paintables” are ONLY available in the smooth /
rectangle finish.
Bags Of
Unhardened Brick
NEW DURABRIC can
provide customers with colour matched bags of unhardened
brick for any repairs that you may wish to make to
existing brickwork. The same process is used as if we were
colour matching to make entire panels of bricks except we
hand mix it in a bucket, adding on minute amounts of oxide
until we have a close match. Contact us should you require
this service.
New Durabric. Factory 1, 30-31 The Concord, BUNDOORA 3083, Victoria
AUSTRALIA Phone 03
9467 2883
·
Fax 03 9467 1061 Melways REF 20, B2